DCI Announces Contract with Cinecert for D-Cinema Compliance Testing & Validation

"Over the next six months, Digital Cinema Initiatives (DCI) and CineCert will work to take DCI's compliance test program to its next level.

DCI has entered into a contractual arrangement with CineCert to complete the validation of the compliance test program begun by the Fraunhofer Institute for Integrated Circuits.

In February 2006, DCI contracted with Fraunhofer to develop a standardized set of procedures to comprehensively test equipment for compliance with the DCI Digital Cinema System Specification, commonly referred to as the DCI Specification. The output of the Fraunhofer project was Version 0.9 of the DCI Compliance Test Plan, released February 14, 2007.

However, due to the non-compliant status of digital cinema equipment at the time, Fraunhofer was unable to complete a full validation process. The final plan developed by CineCert and DCI will include errata to the DCI Specification and all relevant SMPTE digital cinema standards, most of which were not officially published at the time of the Fraunhofer effort.

In addition to the final test plan, a specification for test materials and the test materials themselves will be created. Specialized test plans will be prepared for a variety of digital cinema hardware and software products, included servers and projectors. Another deliverable will be standardized test reports, which will allow for meaningful comparison of features and test results between tested products.

Concurrent with the CineCert project, DCI will undertake an open process to identify testing entities to perform the tests identified by the DCI compliance test program. That selection process is under development and details will be announced in the future.

The DCI member studios have approved and published version 1.1 of the Digital Cinema System Specification, dated April 12, 2007. Since the initial publication in July 2005 of the DCI Specification, Version 1.0, the specification has received several rounds of errata. Version 1.1 does not include any new revisions; rather it incorporates all 148 previous errata into the body of the specification document, making it easier to read."

Source